Gros problèmes avec Xubuntu

Ce sujet a 4 réponses, 3 participants et a été mis à jour par  Pecoflyer, il y a 4 mois et 1 semaine.

5 sujets de 1 à 5 (sur un total de 5)
  • Auteur
    Messages
  • #7182

    Pecoflyer
    Participant

    Depuis aujourd’hui cela ne va plus très fort avec Xubuntu
    Au démarrage il se met constamment en vérification de fichiers
    Ctrl+C me met en “welcome to emergency mode”et me demande de faire systemctl –reboot.
    Je le fais et tout recommence
    Lors d’un néme redémarrage, les DD ont été vérifiés et j’ai eu le message ( entre autres) fraves erreurs sur home.
    J’ai redémarré en mode recovery ( upstart) sur le kernel 104 et cela remarche.
    J’aurais besoin de vos lumières pour me guider afin de trouver le problème
    Mille mercis

    #7183

    gunsman76
    Participant

    Tu as un problème avec ton HDD, c’est pas Xubuntu qui est en cause.

    #7184

    Pecoflyer
    Participant

    voici le retour de smartctl

    pecoflyer@PCDAD-UP:~$ sudo smartctl -s on -a /dev/sdb
    [sudo] Mot de passe de pecoflyer : 
    smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.4.0-104-generic] (local build)
    Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
    
    === START OF INFORMATION SECTION ===
    Model Family:     Seagate Barracuda 7200.10
    Device Model:     ST3320620AS
    Serial Number:    6QF4AW70
    Firmware Version: 3.AAE
    User Capacity:    320.072.933.376 bytes [320 GB]
    Sector Size:      512 bytes logical/physical
    Device is:        In smartctl database [for details use: -P show]
    ATA Version is:   ATA/ATAPI-7 (minor revision not indicated)
    Local Time is:    Mon Jan 15 18:48:01 2018 CET
    SMART support is: Available - device has SMART capability.
    SMART support is: Enabled
    
    === START OF ENABLE/DISABLE COMMANDS SECTION ===
    SMART Enabled.
    
    === START OF READ SMART DATA SECTION ===
    SMART overall-health self-assessment test result: PASSED
    See vendor-specific Attribute list for marginal Attributes.
    
    General SMART Values:
    Offline data collection status:  (0x82)	Offline data collection activity
    					was completed without error.
    					Auto Offline Data Collection: Enabled.
    Self-test execution status:      ( 249)	Self-test routine in progress...
    					90% of test remaining.
    Total time to complete Offline 
    data collection: 		(  430) seconds.
    Offline data collection
    capabilities: 			 (0x5b) SMART execute Offline immediate.
    					Auto Offline data collection on/off support.
    					Suspend Offline collection upon new
    					command.
    					Offline surface scan supported.
    					Self-test supported.
    					No Conveyance Self-test supported.
    					Selective Self-test supported.
    SMART capabilities:            (0x0003)	Saves SMART data before entering
    					power-saving mode.
    					Supports SMART auto save timer.
    Error logging capability:        (0x01)	Error logging supported.
    					General Purpose Logging supported.
    Short self-test routine 
    recommended polling time: 	 (   1) minutes.
    Extended self-test routine
    recommended polling time: 	 ( 115) minutes.
    
    SMART Attributes Data Structure revision number: 10
    Vendor Specific SMART Attributes with Thresholds:
    ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
      1 Raw_Read_Error_Rate     0x000f   118   075   006    Pre-fail  Always       -       179143269
      3 Spin_Up_Time            0x0003   097   095   000    Pre-fail  Always       -       0
      4 Start_Stop_Count        0x0032   092   092   020    Old_age   Always       -       8796
      5 Reallocated_Sector_Ct   0x0033   094   094   036    Pre-fail  Always       -       249
      7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       237477075
      9 Power_On_Hours          0x0032   093   093   000    Old_age   Always       -       6798
     10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
     12 Power_Cycle_Count       0x0032   091   091   020    Old_age   Always       -       9368
    187 Reported_Uncorrect      0x0032   001   001   000    Old_age   Always       -       47189
    189 High_Fly_Writes         0x003a   064   064   000    Old_age   Always       -       36
    190 Airflow_Temperature_Cel 0x0022   057   045   045    Old_age   Always   In_the_past 43 (Min/Max 32/43 #5)
    194 Temperature_Celsius     0x0022   043   055   000    Old_age   Always       -       43 (0 12 0 0 0)
    195 Hardware_ECC_Recovered  0x001a   063   056   000    Old_age   Always       -       31459009
    197 Current_Pending_Sector  0x0012   096   094   000    Old_age   Always       -       97
    198 Offline_Uncorrectable   0x0010   096   094   000    Old_age   Offline      -       97
    199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
    200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
    202 Data_Address_Mark_Errs  0x0032   100   253   000    Old_age   Always       -       0
    
    SMART Error Log Version: 1
    ATA Error Count: 268 (device log contains only the most recent five errors)
    	CR = Command Register [HEX]
    	FR = Features Register [HEX]
    	SC = Sector Count Register [HEX]
    	SN = Sector Number Register [HEX]
    	CL = Cylinder Low Register [HEX]
    	CH = Cylinder High Register [HEX]
    	DH = Device/Head Register [HEX]
    	DC = Device Command Register [HEX]
    	ER = Error register [HEX]
    	ST = Status register [HEX]
    Powered_Up_Time is measured from power on, and printed as
    DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
    SS=sec, and sss=millisec. It "wraps" after 49.710 days.
    
    Error 268 occurred at disk power-on lifetime: 4896 hours (204 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 2f 63 0e e0  Error: UNC at LBA = 0x000e632f = 942895
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      25 00 08 28 63 0e e0 00      00:55:52.450  READ DMA EXT
      c8 00 08 a8 ec dd ea 00      00:55:52.442  READ DMA
      ca 00 60 00 cc ef ec 00      00:55:52.429  WRITE DMA
      35 00 00 00 c8 ef e0 00      00:55:52.366  WRITE DMA EXT
      27 00 00 00 00 00 e0 00      00:55:52.350  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
    
    Error 267 occurred at disk power-on lifetime: 4896 hours (204 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 2f 63 0e e0  Error: UNC at LBA = 0x000e632f = 942895
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      25 00 08 28 63 0e e0 00      00:55:48.304  READ DMA EXT
      c8 00 08 b0 ec dd ea 00      00:55:48.200  READ DMA
      27 00 00 00 00 00 e0 00      00:55:48.200  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
      ec 00 00 00 00 00 a0 00      00:55:48.200  IDENTIFY DEVICE
      ef 03 46 00 00 00 a0 00      00:55:48.193  SET FEATURES [Set transfer mode]
    
    Error 266 occurred at disk power-on lifetime: 4896 hours (204 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 2f 63 0e e0  Error: UNC at LBA = 0x000e632f = 942895
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      25 00 08 28 63 0e e0 00      00:55:48.304  READ DMA EXT
      ea 00 00 27 63 0e a0 00      00:55:48.200  FLUSH CACHE EXT
      25 00 08 20 63 0e e0 00      00:55:48.200  READ DMA EXT
      35 00 08 88 93 c4 e0 00      00:55:48.200  WRITE DMA EXT
      ea 00 00 1f 63 0e a0 00      00:55:48.193  FLUSH CACHE EXT
    
    Error 265 occurred at disk power-on lifetime: 4896 hours (204 days + 0 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 2f 63 0e e0  Error: UNC at LBA = 0x000e632f = 942895
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      25 00 00 00 63 0e e0 00      00:55:45.001  READ DMA EXT
      35 00 00 00 c4 ee e0 00      00:55:44.985  WRITE DMA EXT
      35 00 00 00 c0 ee e0 00      00:55:44.977  WRITE DMA EXT
      35 00 00 00 bc ee e0 00      00:55:44.960  WRITE DMA EXT
      35 00 00 00 b8 ee e0 00      00:55:44.952  WRITE DMA EXT
    
    Error 264 occurred at disk power-on lifetime: 4880 hours (203 days + 8 hours)
      When the command that caused the error occurred, the device was active or idle.
    
      After command completion occurred, registers were:
      ER ST SC SN CL CH DH
      -- -- -- -- -- -- --
      40 51 00 94 66 0e e0  Error: UNC at LBA = 0x000e6694 = 943764
    
      Commands leading to the command that caused the error were:
      CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
      -- -- -- -- -- -- -- --  ----------------  --------------------
      25 00 08 90 66 0e e0 00      00:09:19.639  READ DMA EXT
      25 00 08 88 66 0e e0 00      00:09:19.639  READ DMA EXT
      25 00 40 e8 66 0e e0 00      00:09:19.622  READ DMA EXT
      25 00 20 c8 66 0e e0 00      00:09:19.613  READ DMA EXT
      25 00 20 a8 66 0e e0 00      00:09:19.613  READ DMA EXT
    
    SMART Self-test log structure revision number 1
    Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
    # 1  Short offline       Completed without error       00%      6752         -
    # 2  Short offline       Completed without error       00%      6520         -
    # 3  Short offline       Completed without error       00%      6516         -
    # 4  Short offline       Completed without error       00%      4871         -
    # 5  Short offline       Completed without error       00%      4405         -
    # 6  Short offline       Completed without error       00%      4002         -
    # 7  Short offline       Completed: read failure       90%      3837         30857537
    # 8  Short offline       Completed: read failure       90%      3837         30857537
    # 9  Short offline       Aborted by host               20%      3708         -
    #10  Short offline       Completed: read failure       10%      1712         297706883
    #11  Short offline       Completed without error       00%       496         -
    #12  Short offline       Self-test routine in progress 90%      6798         -
    
    SMART Selective self-test log data structure revision number 1
     SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
        1        0        0  Not_testing
        2        0        0  Not_testing
        3        0        0  Not_testing
        4        0        0  Not_testing
        5        0        0  Not_testing
    Selective self-test flags (0x0):
      After scanning selected spans, do NOT read-scan remainder of disk.
    If Selective self-test is pending on power-up, resume after 0 minute delay.
    
    pecoflyer@PCDAD-UP:~$ 
    #7189
    nam1962
    nam1962
    Admin bbPress

    Le 195 est impressionnant, mais l’analyse des retours de smartctl n’est pas ma spécialité…


    ? Un jeune site que j'aime bien, la ferrari du T-shirt  ...bio en plus : https://goudronblanc.com
    C'est notre mécène ! 🙂

    #7196

    Pecoflyer
    Participant

    Pour autant que j’aie pu voir aucune des valeurs n’est sous le seuil. La température l’a été une fois dans le passé, donc tout semble en ordre pour l’instant.
    Je vais continuer à surveiller tout cela avec les outils nécessaires.
    Merci en tout cas d’avoir jeté un œil

5 sujets de 1 à 5 (sur un total de 5)

Vous devez être connecté pour répondre à ce sujet.